PD140
140W GaN-based USB-C PD power supply with two USB-C ports and one USB-A port, supporting PD 3.0/3.1 EPR up to 28V for laptops, drones and power tools.
140W.
One brick, three devices.
PD140-2C1A is a 140W GaN USB-C PD power supply with two USB-C ports (140W + 65W) and one USB-A port (18W), universal 90–264VAC input and active PFC.
Small brick.
Full protocol stack.
140W GaN-based USB-C PD power supply with two USB-C ports and one USB-A port, supporting PD 3.0/3.1 EPR up to 28V for laptops, drones and power tools.
GaN Inside.
High power, compact port.
Built on GaN technology, it supports PD3.0/PD3.1 EPR protocols up to 28V/5A. Single-port full load 140W, with multi-port simultaneous output totaling up to 140W — easily fast-charging high-performance laptops and getting high-power devices back online quickly.
One Charger,
Multiple Devices.
2×Type‑C + 1×USB‑A multi-port design; C2 up to 65W, A port 18W. Charge your laptop, phone and tablet simultaneously — no need to carry multiple chargers, at home or on the go.
Worldwide Ready.
Efficient by design.
90–264VAC wide-range input with interchangeable US / EU / UK / CN plugs for worldwide use. Active PFC circuit with PF＞0.95 and up to 93% full-load efficiency for lower power consumption.
Protected on every level.
Certified worldwide.
Full protection against short-circuit, over-voltage and over-current. Backed by CE, CCC, cTUVus and CB safety certifications, plus 30,000-hour MTBF, natural-convection cooling and a 1-year warranty for reliable, worry-free charging.
Every detail,
spelled out.
- USB PD Protocol
- PD3.0, PD3.1, EPR AVS, PPS, QC2.0, QC3.0, QC4+, AFC, Apple2.4, BC1.2
- USB-C1 Output
- 5V3A, 9V3A, 10V3A, 11V3A, 12V3A, 15V3A, 20V5A, 28V5A; PPS 3.3–21V 5A
- USB-C2 Output
- 65W max (5V3A, 9V3A, 12V3A, 15V3A, 20V3.25A)
- USB-A Output
- 18W max (5V3A, 9V2A, 12V1.5A)
- Maximum Output Power
- 140W (USB-C1 single, C2 & A no load); 65W (USB-C2); 18W (USB-A); 140W total (C1+C2+A)
- Output Voltage Regulation
- 1%
- Load Regulation
- 5%
- Output Voltage Ripple
- < Vout × 1% (AC 230V, full load, 20MHz BW, 47µF + 0.1µF caps)
- Start-up Time
- < 3000 ms
- Rise Time
- < 200 ms
- Hold-on Time
- > 3 ms
- Rating Input Voltage
- 100–240VAC, 50/60Hz
Need it customized?
Tell us your voltage, current and connector — we'll tune the PD140 or build a fresh power stage around your spec.